Buying a new furnace may not be a concern right away. But it’s wise to learn the things that will likely impact your choice when you’re ready to buy. Here are seven things you’ll want to think about when you're due for furnace replacement in West Chester.
1. Size and Installation Quality
To operate at maximum efficiency and comfort, your furnace must be properly sized for your home. When it comes to furnaces, bigger is certainly not better. We often get requests from customers to install a big furnace in the mistaken belief that a larger furnace is either more dependable or will offer better comfort.
The opposite is true. Large furnaces will short cycle, or constantly turn on and off. This leaves you uncomfortable, with higher energy bills and a furnace that could wear out much sooner.
This is why it’s crucial to work with the right company when buying a new furnace. Even if it’s the correct size but improperly installed, the U.S. Department of Energy says you could lose as much as 30% of your energy efficiency.
Another key component of installation is ductwork. If yours is old or designed wrong, you might have problems with noise or comfort. A furnace is only as good as the duct system it’s linked to.
At Wesley Wood Service Experts, our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various types of home comfort systems. Besides technical skill, our technicians are also trained in treating you ethically. We also support our work with a 100% satisfaction guarantee for a year.*
2. Energy Efficiency
Furnaces are rated by a term known as AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this measures the annual gas consumption of a furnace. The higher the number, the less gas is spent during the heating process.
If your present furnace is 15 years old, it’s likely ranked well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re wasting up to 30 cents of each dollar you spend on heating.
Here’s how AFUE ratings work now:
- 80 AFUE—minimum efficiency rating in the U.S. and Canada.
- 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
- 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
- 98 AFUE—best efficiency rating available.
3. Blower Motor Technology
As you evaluate new furnaces there is one more important thing to consider: blower technology. This part circulates air throughout your home. And it also uses a lot of electricity, so it’s essential to be familiar with your options.
There are three kinds of blowers available on furnaces today. They include:
- Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a standard blower motor that’s been relatively the same for the past 30 years. This motor is the least expensive and also the least energy efficient.
- Constant torque motor. This technology finds a balance between price and energy efficiency. It provides an electrical efficiency boost over a standard motor design.
- Variable-speed motor. The most energy-efficient furnaces can operate at different speeds. Instead of running at full speed 24/7, they will quietly operate at a low or medium speed at times. This helps improve your comfort while keeping energy costs low, both in the winter and summer. And it also keeps indoor humidity under control.
4. Sound Reduction Technology
Sound has become a very significant consideration with furnace installation, so another dramatic improvement has been noise management. Some of these features include:
- Sealed and insulated cabinets
- Variable-speed blower technology
- Whisper-quiet gas burners
With this technology, you might not even be aware that your furnace is running.
5. Smart Thermostat
You probably have a programmable thermostat, but chances are you probably aren’t making the most of your energy savings. These thermostats can be challenging to program, particularly if your schedule varies from day to day.
A smart thermostat removes all the guesswork about energy efficiency. Many models can learn from your temperature preferences and then produce an energy-saving schedule to match. They also know when you’re home or away and will adjust your heating and cooling as needed.
As an extra perk, you’ll also be able to keep tabs on and adjust your settings from just about anywhere on your phone. Some models can even alert you if they find a problem with your furnace or remind you when it’s time to replace your air filter.
There’s a major difference in furnace quality and reliability. Like any big purchase, we believe it’s best to go with a major brand name. With a leading brand like Lennox® or Goodman®, you’ll have more assurance in the technology and that the manufacturer will uphold its product warranty over the long term.
Furnaces typically have two primary warranty coverage areas:
- Heat exchanger. This is the heart of the furnace and the most expensive component to replace. This part typically has a 20-year limited warranty or lifetime limited warranty, but this can differ based on the manufacturer and furnace model.
- Main components. This includes the blower motor, electronic controls, ignitors and other important parts. Warranties can vary from as little as a one-year limited warranty to as much as a 10-year limited warranty.
When reviewing warranty coverage, it’s important to know it's limited. So, you should make sure you understand the limitations. For example, nearly all standard manufacturer warranties only include the price of the replacement part, not labor. And labor on a new heat exchanger could get very expensive.
Once your new furnace is installed, make sure you complete the product registration right away. Many manufacturers may reduce the warranty term if the product registration is not completed. This step is easy and usually only takes a few minutes.
How much does all this cost anyway? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency model.
As you consider these costs and the impact to your budget, remember that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it offers.
A couple of additional ways to save include:
- Replacing your air conditioner simultaneously.
- Buying at the ideal time, such as in early fall, mid-winter and early spring. You may be able to get extra discounts and rebates during this slower season.
- Take advantage of rebates from the federal and state government, as well as from your local utility provider. We can help you figure out this process.
- Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll get a new furnace with repairs and maintenance included.*
How Do I Know When to Replace My Furnace?
Now that you know what to look for in a new furnace, when should you replace your outdated one? Here are a few tips from our Experts that will help you decide.
Heating systems typically last 15–20 years. How long yours will keep going depends on whether you’ve kept up with furnace maintenance, where you live and your temperature preferences. If you’re in a place with harsh winters, your furnace will operate more often, potentially making it wear out sooner. The same applies if you like to keep your home at a hotter temperature.
Repair Frequency and Cost
Just like any appliance, as furnaces age, the likelihood for frequent furnace repair goes up. If your system is more than 15 years old, those repairs can be especially costly. Common and costly repairs on an older furnace include:
- Blower motor failures
- Ignition control failures
- Heat exchanger failures
If repairs are more than the half the price of a new furnace, it’s generally best to replace it.
Furnaces older than 15 years can be very inefficient. You could be throwing away as much as 30% of the money you spend to heat your home. High energy costs and the desire to reduce energy consumption are also strong reasons to consider replacing your furnace. In fact, an independent study by Decision Analyst shows nearly 20% of homeowners who recently replaced their furnace specifically did so to reduce their utility bills.
Trust Your Furnace Replacement to the Experts
It can seem intimidating trying to research furnace features on your own. Or recognize exactly when you should replace your furnace. Our Wesley Wood Service Experts Experts are here to make the process much simpler. Contact us at 484-401-7577 or schedule an appointment online to book your free home comfort assessment now.
*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.